Save energy
Compared with using low frequency, it can reduce power consumption
,
The transformer of the same weight can output more energy
,
Can be easily connected with large automatic welding tongs Supporting the use of. Suitable for welding thick workpieces and highly conductive metals. Such as aluminum and all galvanized steel sheets, etc. Generally speaking
,
small size and light weight system can speed up movement
,
shorten the work cycle
,
It is a welding machine
The best supporting solution for automatic machinery.
In a semi-automatic device, one medium frequency welding transformer can replace many low frequency transformers
,
Reduce the parallel connection of secondary circuits.
If the one-piece manual welding clamp needs to weigh more than
to
kg
,
this type of transformer is also suitable. For example
The production of small batches of small cars
/
The production of passenger and cargo vehicles and the manufacturing of small-scale experimental machinery and equipment.
Improve power factor
,
Reduce production costs.
It can reduce interference in the secondary circuit with a large open area
The welding current is DC, when there is induction in the secondary winding
/
When there is a magnetic material
/>,
Will not affect welding.
Balance the load of power supply equipment
The medium frequency inverter spot welding machine uses three-phase power and can store energy.
More adaptable to grid fluctuations and voltage drops
Part of the energy is stored by the inverter and then supplied to the load
,
Instead of directly supplying power to the load from the grid .
More accurate and faster current control
Compared with low-frequency systems, it can analyze more parameters more accurately.
Reach the set current faster
Intermediate frequency can adjust the welding current
times faster than traditional technology.
The process is more reliable
Most metals that are applied with solder mask will have better results if DC welding is used.
IF systems are generally more reliable than traditional technologies
,
and can avoid some of the damage that can cause damage to thyristor-based systems.
Reduce operating costs
,
Including saving welding energy at each point and shortening the welding cycle.
Self-produced and sold medium frequency spot welding machine